A robot you rebuild every time
Build a robot from magnetic blocks without soldering and run the included program. Then change the structure and write your own C++ and JavaScript code to test ideas on a moving robot.
-
× 1
Controller block
UNO R4 WiFi: Renesas RA4M1 at 48 MHz, Wi-Fi on ESP32-S3, USB-C. Sensor shield: 14 digital and 6 analog ports, I²C, UART.
-
× 1
Battery block
Li-Po 11.1 V, 1000 mAh. USB-C charging with cell balancing, overcharge and short-circuit protection, a master power switch.
-
× 1
Driver block
L298N: up to 2 A per channel. Takes commands from the controller and spins the motors the right way.
-
× 4
Motor blocks with wheels
TT motors with a 1:48 metal gearbox, about 200 rpm at 6 V. Four wheels — the robot drives and maneuvers in every direction.
-
× 1
Rangefinder block
Ultrasonic HC-SR04: 2 to 400 cm, 15° field of view. The robot sees an obstacle before it drives into it.
-
× 6
Auxiliary cubes
They stiffen the build, join modules and shape the robot. The magnets click and the faces meet flush — they are a pleasure to fiddle with.
- Any faceMagnets in every face: a cube joins a cube from any side.
- No screws, no wiresContacts meet on their own — power and signal pass through the joint.
- A new robot every timeMove a module — a different shape and a different task for the program.
Kit
Rotate by 45°
Click a kit part to pick it up. Bring it to a bare face of the build — the ghost turns green, click to attach; a click in mid-air hangs the part translucent. Click a part to pick it up again; right-click or Shift+click selects a build for rotation. Drag to orbit, scroll to zoom.
> детали разложены как в кейсе — соберите робота
- MotionFour motors: forward, back, turns and precise maneuvers.
- C++ and JavaScriptFrom basic commands to your own behaviour algorithms.
- Wi-Fi and BluetoothControl from a phone or laptop, no wires.
- IoTThe robot connects to other devices and smart-home projects.
- Arduino and Raspberry PiFor extending projects: check compatibility of specific modules and libraries before connecting them.
- Quick rebuildingThe magnets hold firmly and let go easily — a new shape for a new task.
- age 8+School and university studentsFollow the lessons, run the included program and make your first code changes.
- lessons and projectsSchools and clubsA tool for classes and projects. Chatty teaches at the Robotex and GoROBO schools, and PXLBots is part of those classes.
- prototypesMakers and engineersQuick prototypes, experiments and demos on standard electronics.
PXLBots basic kit
15 500 ₽
- Controller block — 1
- Battery block — 1
- Rangefinder block — 1
- Driver block — 1
- Motor blocks with wheels — 4
- Auxiliary cubes — 6
- Carrying case
- Step-by-step lessons
- Carrying caseEvery block in its slot, wires tucked in. A hard shell protects the parts on the road.
- Lessons includedStep-by-step lessons on building and programming. The base program is preloaded.
- In-house productionWe develop and assemble kits in Saint Petersburg and help you choose the right components.
- Stock and deliveryDelivery across Russia. We confirm kit and component availability and timing when you order.